The Ruffstuff Toyota 8" Axle Housing! - Page 4

bustanutley · 10-30-2009, 09:08 AM

9.5" Tundra diff is 32 spline, but the spidersshould be interchangeable. The pinion also uses bigger splines, same as 8.4 diff. Everything else is interchangeable. Aftermarket gears should just be cruiser gears. This is the same diff used in FJ100s and maybe 200s? not sure.

boagreg · 10-30-2009, 09:30 AM

Quote:

Originally Posted by bustanutley

9.5" Tundra diff is 32 spline, but the spidersshould be interchangeable. The pinion also uses bigger splines, same as 8.4 diff. Everything else is interchangeable. Aftermarket gears should just be cruiser gears. This is the same diff used in FJ100s and maybe 200s? not sure.

Thanks for the info. That pinion looks beef.

bustanutley · 10-30-2009, 10:06 AM

Different gear ratios, 4.10 and 3.90

Flatty · 10-31-2009, 12:16 PM

Did you make the full float ends yet? I will be picking up either this one or the 9" when I am ready, but I don't want to spend the big $$ on the spidertrax ends.

Thanks
Dima

Gravel Maker · 10-31-2009, 01:43 PM

Quote:

Originally Posted by Flatty

Did you make the full float ends yet? I will be picking up either this one or the 9" when I am ready, but I don't want to spend the big $$ on the spidertrax ends.

Thanks
Dima

Are our next project after the hubs are complete....

Just a teaser pic...But not a stock 14 bolt replica, it costs' the same to make a stock replica as it costs' to make something really good, 40 spline and BA! And why would you want to spend that much and only get stock heavy rotors?

NateK · 11-01-2009, 11:52 PM

Quote:

Originally Posted by Gravel Maker

Bigger R&P though...

Thats for now, I think we will see more selection soon...

The 4.7 and 4.6 have a 9.5" R&P.

Yes gears will be available for them but I don't know about soon...

Gravel Maker · 11-02-2009, 11:48 AM

Quote:

Originally Posted by NateK

The 4.7 and 4.6 have a 9.5" R&P.

Yes gears will be available for them but I don't know about soon...

For now its a waiting game before they get popular...

81_4xToy · 11-03-2009, 02:20 PM

The website says the new knuckle balls are $130.00. Is that each, or the set?

Gravel Maker · 11-03-2009, 03:49 PM

Quote:

Originally Posted by 81_4xToy

The website says the new knuckle balls are $130.00. Is that each, or the set?

Of what they will cost when complete, it is an each cost, they are not cheap to make...

Chop Shop · 11-07-2009, 01:00 AM

I would like a toyota front housing that I can weld my own balls on.

I would like it with a notch for an elocker if possible.

Will these housings fit over the larger bearing cap on an elocker?

do you have a truss kit for the toyota housing yet?

Thanks Brad

Gravel Maker · 11-07-2009, 09:29 AM

Quote:

Originally Posted by Chop Shop

I would like a toyota front housing that I can weld my own balls on.

I would like it with a notch for an elocker if possible.

Will these housings fit over the larger bearing cap on an elocker?

do you have a truss kit for the toyota housing yet?

Thanks Brad

The changes can be done in a short time but I need to buy an elocker...

Yes they would fit over the bigger caps....

The Toyota truss should be only a week or so...

boagreg · 11-07-2009, 09:32 AM

Quote:

Originally Posted by Gravel Maker

The changes can be done in a short time but I need to buy an elocker...

You could also just buy a gasket from Toyota for an E-Locker and that would give you the layout of where it needs to be bigger.

I'm still waiting for the 9.5" and some new balls. Mine are all rusty and old.

Gravel Maker · 11-07-2009, 10:13 AM

Quote:

Originally Posted by boagreg

You could also just buy a gasket from Toyota for an E-Locker and that would give you the layout of where it needs to be bigger.

I'm still waiting for the 9.5" and some new balls. Mine are all rusty and old.

The holes would never be perfect with just a gasket and the Toyotas are dammed precise!

boagreg · 11-07-2009, 11:14 AM

Quote:

Originally Posted by Gravel Maker

The holes would never be perfect with just a gasket and the Toyotas are dammed precise!

True, I wasn't thinking about the holes. I was just thinking about the shift fork slot.

Gravel Maker · 11-07-2009, 10:28 PM

Yes, a couple of different holes....not impossible but need a third to be accurate...

esam · 11-11-2009, 07:19 AM

I have been looking for the new toy ball ends on the web site, are they available yet?

tunaman · 11-18-2009, 09:21 PM

are you guys going to make an 8.4 tacoma/t100 diff housing?

Gravel Maker · 11-18-2009, 09:55 PM

Quote:

Originally Posted by esam

I have been looking for the new toy ball ends on the web site, are they available yet?

Not yet but i am getting promises...

Quote:

Originally Posted by tunaman

are you guys going to make an 8.4 tacoma/t100 diff housing?

Not til Jan/Feb'ish, the Cruiser comes first...

10-30-2009, 09:08 AM	#76
bustanutley Registered User Join Date: Oct 2003 Member # 23362 Location: CrAwLoRaDo Posts: 427	9.5" Tundra diff is 32 spline, but the spidersshould be interchangeable. The pinion also uses bigger splines, same as 8.4 diff. Everything else is interchangeable. Aftermarket gears should just be cruiser gears. This is the same diff used in FJ100s and maybe 200s? not sure. __________________ 1970 FJ40 rollin on foDees! HOMEGROWN

10-30-2009, 10:06 AM	#78
bustanutley Registered User Join Date: Oct 2003 Member # 23362 Location: CrAwLoRaDo Posts: 427	Different gear ratios, 4.10 and 3.90 __________________ 1970 FJ40 rollin on foDees! HOMEGROWN

10-31-2009, 12:16 PM	#79
Flatty Registered User Join Date: Feb 2000 Member # 29 Location: San Mateo, CA Posts: 5,410	Did you make the full float ends yet? I will be picking up either this one or the 9" when I am ready, but I don't want to spend the big $$ on the spidertrax ends. Thanks Dima __________________ CJ3A in the works

11-03-2009, 02:20 PM	#83
81_4xToy Registered User Join Date: Jul 2003 Member # 21027 Location: Sunray Texas,Future Republic of Mexico Posts: 296	The website says the new knuckle balls are $130.00. Is that each, or the set? __________________ Quote by Jeep Recovery Team : "I didn't realize you had a jeep.... That confirms it, you are clueless" Quote by sundowner : "you have to remember that Jeeps were designed by retards, so things were kept as simple as possible."

11-07-2009, 01:00 AM	#85
Chop Shop Registered User Join Date: Nov 2008 Member # 123160 Posts: 79	I would like a toyota front housing that I can weld my own balls on. I would like it with a notch for an elocker if possible. Will these housings fit over the larger bearing cap on an elocker? do you have a truss kit for the toyota housing yet? Thanks Brad __________________ Isnt one 2.5 ton like the same as two and a half dana 60s?

11-07-2009, 10:28 PM	#90
Gravel Maker Quick with a laser! Join Date: Aug 2005 Member # 51387 Location: Loomis, CA Posts: 4,640	Yes, a couple of different holes....not impossible but need a third to be accurate... __________________ Dan Fredrickson www.ruffstuffspecialties.com Products that are better than "Good Enough" Sales 916.509.2242 Tech/Sales 916.600.1945 Check out our NEW Axle Housings!

11-11-2009, 07:19 AM	#91
esam Registered User Join Date: Apr 2009 Member # 133705 Posts: 20	I have been looking for the new toy ball ends on the web site, are they available yet?

11-18-2009, 09:21 PM	#92
tunaman dish monkey Join Date: Nov 2002 Member # 15010 Location: Loomis, CA Posts: 424	are you guys going to make an 8.4 tacoma/t100 diff housing? __________________ "Sometimes reasonable men must do unreasonable things" -Marvin Heemeyer, 2004.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode